JBM 54172 Manual De Instrucciones página 3

REF. 54172-54173
EN
INSTRUCTION MANUAL
PRODUCT'S PRESENTATION
This rotating beacon allows you to correctly indicate
vehicle's position in order to show danger, priority or
emergency.
It is compliant with UNECE Regulation number 65 (R65),
for which is allowed to be used in public roads.
For a more convenient installation, it has a built-in re-
chargeable battery, so it is not necessary to install
power supply wires.
SAFETY INSTRUCTIONS
•Make sure that the beacon is properly installed before
driving the vehicle.
•Do not look straight into the light, the bright light may
cause a serious eye damage.
•Follow the country-specific regulations when installing
the warning light on the roof of the vehicle.
OPERATION
1.Press the ON/OFF button to turn on the light.
2.To change the function, press the button during 3 se-
conds.
3.To turn off the light, press the ON/OFF button.
When you turn on the light again, the function working will
be the same as it was when the product was turned off.
PARTS LIST
54172
1-Battery status display
2-ON/OFF button
3-Charging port
54173
1.Battery status display
2.ON/OFF button
3.Charging port
4.Magnetic base
TECHNICAL SPECIFICATIONS
Light source: 45 PCS LED (SMD2835)
Power: 20W
Input voltage: DC 5V
Battery: Li-ion rechargeable (18650) 7.4V/2200 MA
Charging time: 2-3 hours
Discharging time: 2-3 hours
Protection level: IP65
Working temperature: -30°C to 50°C
Homologation: ECE R65, ECE R10
Functions: Single flashing / Dual flashing / Rotating.
Hood material: Polycarbonate (PC)
Base material: Acrylonitrile butadiene styrene (ABS)
MEASUREMENTS
54172
54173
CONTENTS
-LED rotating beacon
-USB cable
· 3 ·