Idiomas disponibles
Idiomas disponibles
Under program mode setting interface, regardless of which day, when you choose program from
P1 to P7, press and hold OK for 3 seconds to enter the setting interface of the mode. The setting
will be memorized (in case of power failure, it will also be memorized).
1. Choose mode for the hour: press + to choose comfort mode
or OK to keep previous setting. After on, it will automatically go to setting for next hour.
2. At the last hour, press + / -, or OK to finish the setting and go back to previous setting interface.
For example, if you enter the P1 setting from below interface (day 1, P1), it will go back to below
interface (day 1, P1) after you finish P1 24-hour setting.
NOTES:
1. In case of power failure, the unit keep in memory only the parameters, temperature and
operating mode. When power is restored, the clock should be adjusted again to operate the
program modes properly.
2. After you finish program mode setting, it will be saved but will not automatically start working
at program mode. You need to press left/right arrow button to choose program mode to make the
heater work at this mode.
3. Keyboard lock setting
Press + & - at the same time to enter setting menu interface, and + / - to choose keyboard lock
icon
, press OK to activate the keyboard lock function
In order to unlock, press OK for three seconds.
,
- to choose economic
and go back to working interface.
EN
mode
