Idiomas disponibles
Idiomas disponibles
Symbol
Function
Standby
OK
To select working mode: comfort/ ECO/ Program modes or Fil Pilote/ Window
detection mode/ Anti-freeze
+ & -
Press both icons at the same time to enter setting menu:
time setting/program modes setting / Keyboard lock
03 Howe to use
When first use the appliance, there will be some slight smell. It is normal. The smell will disappear
after heater working for an hour.
I.
Mode selection (OK button)
1. For the first time you use the device, after you connect to the power supply and after that the
clock is set, refer to the time setting instruction in "setting menu". The device will be in standby
mode, and you can press the standby button to go to comfort mode.
NOTE: In case of power failure, the unit keep in memory only the parameters, temperature and
operating mode. When power is restored, the clock should be adjusted again to operate the
program modes properly.
Press OK button to toggle among the modes: comfort
Pilote
/ Anti-freeze
2. Program modes and Fil pilote mode
Program modes and Fil pilote share the same icon
When the appliance is working on Program mode, press and hold OK button for 3 seconds, the
appliance will shift from Program mode to Fil pilote mode.
When the appliance is working on Fil pilote mode, press and hold OK button for 3 seconds, the
appliance will shift from Fil pilote mode to Program mode.
The interface of program mode and Fil pilote mode are as below:
.
/ Eco
/ Program mode
.
And these 2 modes are mutually exclusive.
EN
or Fil
