Idiomas disponibles
Idiomas disponibles
2.5
How to use the display
On the display of your e-scooter, you will find one multifunction button positioned
under the display.
Turning on/off
To turn the e-scooter on or off, press and hold the multifunction button for
2 seconds. After 5 minutes of inactivity when switched on, the e-scooter will
automatically turn itself off to conserve the battery.
Headlights
When the e-scooter is switched on, a short press of the multifunction button will
turn the headlights off and on.
Speed
The current speed is shown by the large digits in the centre of the display.
The throttle will not engage at speeds below 3km/h. If less than 3km/h shows on the
display, push off the ground until 3km/h, after which the throttle will engage with a
thumb press.
Drive mode
The drive mode is displayed with the
The first time you use the e-scooter, it is set to the 'normal' mode. Double pressing
of the multifunction button will enable you to cycle through the drive modes.
The chosen drive mode is saved when the e-scooter is turned off.
click x2
click x2
6
20
25
km/h
km/h
km/h
12
icon above the speed display.
Mode
Pedestrian
Speed Limit
6 km/h
Display
Mode info
Headlight flashes
Normal
20 km/h
Off
White
Best range and
everyday riding.
High
25 km/h
Red
Best hill climbing
and acceleration.
Pure Advance Flex
