PASSO/STEP/PASO 5
Remove HEX THREAD BOLT (84) FROM SELECT SHAFT(20) ， AND REMOVE HEX BOLT
M10*25 (71) , SPRING WASHER M10 (81) AND FLAT WASHER M10 (82) FROM GUIDE-ROD (18);
REMOVE MAGNETIC PIN (15) ,TOP-PLATE(17) AND SELECT SHAFT(20) ,PUT 15 PCS WEIGHT
PLATE(21) INTO GUIDE-ROD(18) ,THEN INTALL MAGNETIC PIN (15) ,TOP-PLATE(17) AND SELECT
SHAFT(20) TO GUIDE-ROD (18) AGAIN.
Fixed GUIDE-ROD(18) USING HEX BOLT M10*25(71), SPRING WASHER M10(81) AND FLAT
WASHER M10(82) ;INSTALL HEX THREAD BOLT(84) TO
THREAD BOLT(84) TO CABLE (48) IN RIGHT POSITION.
Nº
English description
15
MAGNETIC PIN
17
TOP-PLATE
18
GUIDE-ROD
20
SELECT SHAFT
21
WEIGHT PLATE
48
CABLE
71
HEX BOLT M10*25
81
SPRING WASHER M10
82
FLAT WASHER M10
84
HEX THREAD BOLT
SELECT SHAFT(20),THEN ADJUST HEX
12
Qty
1
1
2
1
15
1
2
2
2
1
