Dimplex SWM3520-EU Manual De Instrucciones página 12

Operation
Remote control
Remove the battery cover on the back of the remote by sliding downwards and insert
2 x AA batteries ensuring that the batteries are fitted correctly. Refit the battery cover.
NOTE: Please make sure the fireplace is plugged in and the ON / OFF Power Switch
on the fireplace is in the ON position before set any function.
Below you will find an example of the steps how to set the 7-day timer.
NOTE: Firstly, you must set the time with the remote control (steps 1 to 3) before you
can set the 7-day timer.
Example: The time is 16.50 on Tuesday and you would like the fireplace to turn on
automatically at 17.00 on Tuesday and you also want to set the room temperature at 25C
and to turn off at 18.00 on Tuesday
NOTE: Make sure the fireplace turns on flame and Ember Bed. Hold the remote
handset and point to the front face of fireplace and the fireplace receives a remote
signal, the Ember Bed will blink once.
Day of the week.
Can choose from
1-7. means
Tuesday.
Follow below steps to set the time with the remote control.
Step 1: Press to wake up the remote handset.
Step 2: Hold 5 seconds to enter the current demo timer setting.
Step 3: When flash,
Press or to set today to Tuesday (example)
Press or to set the hour to 16.
Press or to set the minute to 50.
Room temperature setting.
means control the house
temperature in 25�C
means the heating keep working.
Time to turn on and off.
means turn on at 17:00
means turn off at 17:00
The current time.
- 22 -
Operation
7 days timer setting
Step 4: Hold 5 seconds to enter the 7 days timer setting.
Step 5: When flash, press to set the automatically turn on Tuesday.
Step 6: Press to set the automatically turn on time at 17:00.
Press to set the room temperature to 25�C.
Step 7: Press to set the automatically turn off time at 18:00 on
Tuesday.
Step 8: Turn off the fireplace by press
Step 9: Sit and wait and the fireplace will turn on automatically in a few minutes.
Step 10: Fireplace will turn on automatically. Wait 1 hour, then the fireplace will
automatically turn off.
You have now successfully set the 7-day timer
NOTE: All the settings will be cleared when the fireplace is unplugged.
.
- 23 -
EN