Idiomas disponibles
Idiomas disponibles
ENG
CE DECLARATION CONFORMITY.
Werku
declares that the sander is in
®
►
accordance with the European Directives and
Standards 2006/42/CE, 2006/95/CE, 2004/108/
CE, EN62841-1:2015+AC:15, EN62841-2-
4:2014, EN55014-1:2006/+A1:2009/+A2:2011,
EN55014-2:1997/+A1:2001/+A2:2008, EN61000-3-
2:2006/+A1:2009/+A2:2009 and EN61000-3-3:2008.
La Coruña, 09/10/2019
R Yáñez
Werku Tools SA
TECHNICAL CHARACTERISTICS.
Voltage-frequency 230V~50Hz
►
Class II
Protection index IP20
►
►
system
Speed rate 15000 min
►
sizes 140x140x80mm
140x140x80mm
Orbit diameter 2mm
►
weight 1.3 kg
Acoustic pressure LpA <84
►
dB(A)
Respective uncertainity KpA 3 dB(A)
►
Acoustic pressure LwA <95 dB(A)
►
uncertainity KwA 3 dB(A)
Respective uncertainity Kh 1.50 m/s².
►
SAFETY INSTRUCTIONS.
Read all security warnings and all instructions
►
Failure to follow all warnings and instructions
►
listed below may result in electrical shock, fire
and/or serious injury
instructions for future reference
avoided in many cases by recognizing a potentially
hazardous situation before it occurs and by
observing appropriate safety procedures
use this sander for other applications than those
specified in this manual.
WORK AREA SAFETY.
Keep work area clean and well lit
►
dark areas invite accidents
in explosive atmospheres, such as in the presence of
flammable liquids, gases or dusts
children and curious while operating a power tool
Distractions can cause you to lose control.
►
PERSONAL SAFETY.
Stay alert, watch what you are doing and use
►
common sense when operating a power tool
Do not use a power tool while tired or under
►
the influence of drugs, alcohol or medicines
moment of inattention while operating power tools
may cause damage serious personal.
Power 200W
►
Exhaust
►
Base
►
-1
Sandpaper sizes
►
Net
►
Respective
►
Vibration Ah <3.03 m/s²
►
Keep all warnings and all
►
Accidents can be
►
►
Cluttered and
►
Do not handle power tools
►
Keep away from
►
USE PPE'S.
Use protection glasses according EN166
►
protection masks according EN149
the type of work, use other precise PPE.
DO NOT WORK ON TIPTOES.
Keep your feet on the ground and balance at all
►
times
This enables better control of the power
►
tool in unexpected situations.
DRESS PROPERLY.
Do not wear loose clothing or jewelry
►
your hair, clothing and gloves away from moving
parts
Loose clothes, jewelry or long hair can be
►
caught in moving parts
connecting means for extracting and collecting
dust, make sure they are connected and properly
used
The use of these devices can reduce dust
►
related hazards.
ELECTRICAL SAFETY.
The plug of the power tool must match with the
►
base of the socket
way
Do not use any adapter plug with earthed
►
power tools
bases will reduce the risk of electric shock
body contact with grounded surfaces such as
pipes, radiators, cookers and refrigerators
is an increased risk of electric shock if your body
is grounded
wet conditions
increase the risk of electric shock
DO NOT ABUSE THE CORD.
Never use the cord to carry, lift or unplug the
►
Do not
power tool
oil, sharp edges or moving parts
or entangled cords increase the risk of electric
shock
►
use an extension cord suitable for outdoor use
The use of an extension cord suitable for
►
outdoor use reduces the risk of electric shock
If the use of a power tool in a damp location is
►
unavoidable, use a power protected by a residual
current device (RCD)
reduces the risk of electric shock.
AVOID ACCIDENTAL STARTING.
Make sure the switch is in "off" position before
►
connecting to the network, or when taking or
A
►
carrying the power tool
with your finger on the switch or plugging in
power tools that have the switch in "on" position
2
English
If there are devices for
►
Never modify the plug in any
►
Unmodified plugs and matching
►
Do not expose power tools to rain or
►
Water entering the power tool will
►
Keep the cord away from heat,
►
When operating a power tool outdoors,
The use of an RCD
►
Carrying power tools
►
Use
►
If required by
►
Keep
►
Avoid
►
There
►
Damaged
►
