Idiomas disponibles
Idiomas disponibles
Preheating
To make a cup of good hot espresso coffee, we recommend you shall preheat the appliance
before making coffee, including the funnel, steel mesh and cup, so that the coffee flavour
can not be influenced by cold parts:
• Remove the detachable water tank and open the tank cover to fill it with water, the water
level should not exceed the "MAX" mark in the tank. Then attach the water tank into the
appliance properly.
• Set the steel mesh into the metal funnel (without coffee powder), make sure the tube
on the funnel aligns with the groove in the appliance, then insert the funnel into the ap-
pliance from the "INSERT" position, and you can fix it into the coffee maker firmly by
turning it anticlockwise until it is at the "LOCK" position.
• Place an espresso cup on the removable cup shelf.
• Then connect the appliance to a power source. Make sure the operation knob is on the
"O" position.
• Press the power switch to turn the unit on, power indicator will become blue and coffee
indicator will flash white. The appliance will start preheating.
• When the coffee indicator becomes solid, it shows the preheating is finished.
Making espresso
• Remove the metal funnel by turning it clockwise, set the steel mesh into the metal fun-
nel. Add coffee powder to the steel mesh with the measuring spoon, a spoon of coffee
powder can make about a cup of top-grade coffee, then press the ground coffee powder
tightly.
• Then insert the funnel into the appliance from the "INSERT" position and release the
press bar. You can fix it into the coffee maker firmly by turning it anticlockwise until it is
at the "LOCK" position.
• Turn the operation knob to the
cleaning or warming your cup.
• Turn the operation knob to the
• Turn the operation knob to the "O" position when the desired amount of coffee is obtained
or the colour of coffee becomes weaker obviously, then press the power switch to tun off
the unit. The power indicator will extinguish and the coffee maker stops working, your
coffee is ready now.
WARNING: Do not leave the coffee maker unattended during the process of making coffee,
as you need to operate manually sometimes.
• After finishing making coffee, you can take the metal funnel out by turning it clockwise,
then pour the coffee residue out with the steel mesh pressed by the press bar.
• Let them cool down completely, then rinse under running water.
E NGL I SH
8
position, hot water will flow out, you can use it for
position. The coffee will flow out.
