Idiomas disponibles
Idiomas disponibles
Starting and Stopping
Before Starting the Engine
1. Fill the fuel tank as instructed in the "Before
Operation" section of this manual (page US 10).
2. Rest the Handheld Blower on the ground.
3. Make sure that the area is clear of any broken glass,
nails, wire, rocks or other debris.
4. Keep all bystanders, children and animals away from
the working area.
Cold Starting Procedure
This Blower is equipped with a fuel primer and a choke
system. To start a "cold" engine properly, perform the
following procedure:
1. Pump the primer bulb at the bottom of the carburetor
until fuel can be seen flowing through the fuel return
line to the fuel tank. (Flowing fuel should be almost
clear, not foamy or full of bubbles.)
2. Move the choke lever to the closed (
3. Move the stop switch to the "ON" position.
4. (1) Press the throttle trigger.
5. Hold the Handheld Blower with your left hand and
) position.
6. Pull the starter grip. Grasping the starter grip, slowly
US- 12 -
(2) Move the throttle setting lever to half position.
(3) Release the throttle trigger.
(4) Release the throttle setting lever.
(Throttle is kept in half position.)
press it down firmly. Hold the assist handle with your
right foot gently.
IMPORTANT: Be careful not make damages to
fuel tank or the blower by your foot.
pull the starter cord out until you feel resistance, then
pull the cord quickly and powerfully. Pull the starter
grip until the engine starts.
