Quick Tools QU707D+ Instrucciones De Uso página 26

2.9. Soldering tips
The current range of 960 soldering tips can be found at: quick-tools.de
When a new soldering tip is used for the first time, it should be wetted with
solder to protect it from oxidation. A layer of fresh solder should also be applied
before placing it in the soldering iron stand. If the soldering tip is oxidized due
to improper use, it is recommended to clean it with brass wool or brass brush.
In addition, a soldering tip reactivator can also be used at low temperature
(250 – 280°C).
2.10.
NOTE: Changing the nozzle must only be done when the air plunger is switched
off and with the air plunger cooled to room temperature.
Insert the desired nozzle on the air outlet of the hot air plunger. Make sure that
the four positioning clamps on the nozzle engage with the fits of the steel tube.
Lock the nozzle with the help of the enclosed key. With the help of the key, the
nozzle can be easily removed from the hot air plunger.
Hot air nozzles included:
A2025 Ø 2.5 mm
A2064 Ø 6.4 mm
A2084 Ø 8.4 mm
Further selection at: quick-tools.de
We wish you much joy and success in using your QUICK soldering and hot air
station and are happy to receive your suggestions for improvements.
You can also contact us if you have any problems or questions about your
application.
Your team at Bräunlich GmbH
Hot air nozzles
10
USER MANUAL