Idiomas disponibles
Idiomas disponibles
Specifications of the bolt / wrench
-
Nominal diameter
A
B
C
NOTE: The type of the bit adapter varies depending
on the country.
Setting up the tool
CAUTION:
Always be sure that the side
handle and the reaction receiver are installed
securely before operation.
NOTICE:
Do not over tighten the bolts. It may
damage the tool.
Installing the side handle
Remove the bolts shown in the figure from the tool.
The removed bolt is not needed for this tool if you want
to use this tool as a cordless earth auger.
Keep the bolts so that they are not lost.
1
Fig.2
► 1. Bolt
Wrench size (H)
of the bolt
M 12
10 mm (3/8")
M 8
6 mm (1/4")
M 6
5 mm (3/16")
1
Place the side handle on the tool.
Tighten the all four bolts temporarily, and then securely
tighten the bolts using the wrench.
3
2
1
Fig.3
► 1. Side handle 2. Bolt A 3. Bolt B
6 ENGLISH
2
3
