ECOFOREST LEGEND Manual De Instalación Y Mantenimiento página 34

 
B

Ecoforest only guarantees the correct operation of the stove if the dimensions and the position of the
ventilation grids are respected.
If the installation does not allow to respect the location of the ventilation grids, the standard measures of
built-in installations must be taken into account (figure 8), in order to avoid excess temperature on electronic
board and temperature probe. It is recommended to have one of the ventilation grilles at the CPU height to
facilitate its cooling and revision.
A Lateral wall 'flammable.
A Lateral wall 'not flammable.
B Back of the stove.
C Open door and stove depth.
D Cover.

Ventilation grill. OBLIGATORY.
Isolated output gas pipe within the

socket. OBLIGATORY
4.14. To recess the ECO III model, it is necessary to screw down 2 angle brackets to the floor (  ) and then secure
them with the screws from the front (  ).

Angle brackets fastened to the floor.
Fit the stove frame to the angles and

place the decorative cap.
Stand-off distances are the same for all models.
 
B
B
C
C
C
C
See dimensions
Effective area
RECESSING THE ECO I INSERT AND ECO II INSERT STOVES.
B
50

Drawing 7
≥ 650 mm
≥ 420 mm
≥ 80 mm
≥ 500 mm
≥
2
456 cm x 2
Ø80mm.
643 mm
2 units
33
B-B SECTION C-C SECTION
50 50
Drawing 8
Drawing 9
50