Reverse Door
Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
y
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that
y
it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
y
Do not lay the unit flat as this may damage the coolant system.
y
It s better that 2 people handle the unit during assembly
y
1. Remove two screws at rear side of top cover.
2. Remove top cover and place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge of freezer door. Then remove the door and
place it on a soft pad to avoid scratch.
unscrew
