Idiomas disponibles
Idiomas disponibles
General Warnings
• Choking hazard — This product contains small parts that could be swallowed by children. This poses a
choking hazard.
• Risk of electric shock — This device contains electronic components that operate via a power source
(power supply and/or batteries). Only use the device as described in the manual, otherwise you run the
risk of an electric shock.
• Risk of fire/explosion — Do not expose the device to high temperatures. Use only the recommended
batteries. Do not short-circuit the device or batteries, or throw them into a fire. Excessive heat or improper
handling could trigger a short-circuit, a fire or an explosion.
• Risk of chemical burn — Make sure you insert the batteries correctly. Empty or damaged batteries could
cause burns if they come into contact with the skin. If necessary, wear adequate gloves for protection.
• Do not disassemble the device. In the event of a defect, please contact your dealer. The dealer will
contact the Service Centre and can send the device in to be repaired, if necessary.
• Tools with sharp edges are often used when working with this device. Because there is a risk of injury
from such tools, store this device and all tools and accessories in a location that is out of the reach of
children.
Parts overview
1. Eyepiece
2. Focus knob
3. Objective turret
4. Stage
5. On/off switch ( illumination)
6. Electronic light source
7. Base with battery compartment
8. Battery compartment
9. Cover plates and adhesive labels
10. Prepared slides and blank slides
1. What is a microscope?
A microscope contains two lens systems: the eyepiece and the objective. We're presenting these systems
as one lens each so that the concept is easier to understand. In reality, however, the eyepiece (1) and the
objective in the turret (3) are made up of multiple lenses.
The lower lens (objective) produces a magnified image of the prepared specimen (10). The picture, which
you can't see, is magnified once more by the second lens (eyepiece, 1), which you can see as the 'micro-
scope picture'.
2. Assembly and location
Before you start, choose an ideal location for using your microscope. It's important that you choose a
spot with enough light for normal observation. Furthermore, it is recommended that you place the micro-
scope on a stable surface, because a shaky surface will not lead to satisfactory results.
11. Specimen Vials
12. Empty Vials
13. Magnifying Glass
14. Pipette
15. Tweezers
16. Aperture wheel
17. Measuring cup
18. Hatchery
19. MicroCut
20. Smartphone holder
21. 2x AA Batteries
EN
11
