Step 18
NOTE: The UPPER GUIDE (48M) tabs should be down before
å
starting this step.
Insert the LOWER GUIDES (49M) in the SLIDING DOOR (H) at
å
an angle into the track in the FIXED SHELF (M). Then, tilt the
SLIDING DOOR (H) up vertically. Push the UPPER GUIDE (48M)
tabs up into the track in the TOP (O).
NOTE: The DOOR should slide freely in the track. If needed, turn
å
the cam on the LOWER GUIDES to adjust the door up or down.
Peel the BUMPERS from the BUMPER CARD (29M) and stick
å
the BUMPERS on the ENDS (A and B) where it comes in contact
with the SLIDING DOOR (H).
29M
Turn the cam to
adjust the door
up or down.
www.sauder.com/service
B
H
M
49M
O
A
425011
If you're doing this to
help a friend, don't
leave without a bite.
The tab should
be down before
you insert it into
the upper track.
UPPER GUIDE (48M)
29M
The tab should
be up after the
DOOR is in place.
Page 23
