Idiomas disponibles
Idiomas disponibles
1
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new product brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability for
damage to the product or caused by the product arising
from:
• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts
• Improper use
Note:
Read the whole text of the operating manual before as-
sembly and commissioning.
This operating manual should help you to familiarise
yourself with your product and to use it for its intended
purpose.
The operating manual includes important instructions
for the safe, proper and economic operation of the
product, for avoiding danger, for minimising repair costs
and downtimes and for increasing the reliability and ex-
tending the service life of the product.
In addition to the safety instructions in this operating
manual, you must also observe the regulations applica-
ble to the operation of the product in your country.
Keep the operating manual package with the power tool
at all times and store it in a plastic cover to protect it
from dirt and moisture. They must be read and carefully
observed by all operating personnel before starting the
work.
The product may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such products must also be observed.
We accept no liability for accidents or damage that oc-
cur due to a failure to observe this manual and the
safety instructions.
2
Product description (fig. 1)
1.
SDS-Plus tool receiver
2.
Dust cap
3.
Locking sleeve
4.
Depth stop
20 | GB
5.
Depth stop locking screw
6.
Operating mode selector switch
7.
Rotational direction switch
8.
On/off switch
9.
Handle
10.
Battery mount
11.
Battery*
12.
Release button (battery)
13.
Additional handle
14.
LED work lamp
15.
Chisel flat
16.
Chisel pointed
17.
Drill Ø 10
18.
Drill Ø 8
19.
Drill Ø 6
* = not included in the scope of delivery!
3
Scope of delivery (Fig. 1)
Item Quanti-
ty
4.
1 x
13.
1 x
15.
1 x
16.
1 x
17.
1 x
18.
1 x
19.
1 x
1 x
1 x
4
Proper use
The product is intended for hammer drilling in brick,
concrete and stone, for chiselling in concrete, stone
and plaster, and for drilling in stone, wood and metal.
The product may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or injuries
of any type resulting from this.
An element of the intended use is also the observance
of the safety instructions, as well as the assembly in-
structions and operating information in the operating
manual.
Persons who operate and maintain the product must be
familiar with the manual and must be informed about
potential dangers.
The liability of the manufacturer and resulting damages
are excluded in the event of modifications of the prod-
uct.
The product may only be operated with original parts
and original accessories from the manufacturer.
The safety, operating and maintenance specifications
of the manufacturer, as well as the dimensions speci-
fied in the technical data, must be observed.
Please note that our products were not designed with
the intention of use for commercial or industrial purpos-
es. We assume no guarantee if the product is used in
commercial or industrial applications, or for equivalent
work.
www.scheppach.com
Designation
Depth stop
Additional handle
Chisel flat
Chisel pointed
Drill Ø 10
Drill Ø 8
Drill Ø 6
Cordless hammer drill
Operating manual
