Philips NORELCO OneBlade QP6530 Manual Del Usuario página 5

Ocultar thumbs Ver también para NORELCO OneBlade QP6530:
Idiomas disponibles

Idiomas disponibles

5 To remove the comb, hold it on both sides
and pull it off the blade.
Using the precision trimming comb
- The precision trimming comb allows you to
trim hair to different lengths. When you
trim for the first time, start at the highest
length setting to familiarize yourself with
the product.
- The settings on the wheel correspond to
the remaining hair length after trimming in
millimeters. You can select a length from
0.5 mm (1/64 in.) to 9 mm (23/64 in.) (Fig.
12).
- Always trim in the direction of the teeth of
the precision trimming comb, making sure
that the flat part of the comb is in full
contact with the skin for an even trimming
result (Fig. 13).
- Since all hairs do not grow in the same
direction, you may want to try different
trimming directions (i.e. upwards,
downwards, or across). Practice is best for
optimum results.
- Make sure to always move the product
against the grain.
- Trimming is easier when the skin and hair
are dry.
1 Place the front part of the comb onto the
blade and push the projection at the back
of the comb into the product ('click') (Fig.
14).
2 Turn the hair length setting wheel to select
the desired hair length setting (Fig. 15). The
settings on the wheel correspond to the
remaining hair length after trimming.
3 Switch on the product (Fig. 5).
4 Place the comb onto the skin and move the
product upwards slowly, against the grain
(Fig. 16).
5 Switch off and clean the product after each
use (see 'Cleaning').
6 To remove the comb, pull the back part off
the product and then slide the comb off the
blade (Fig. 17).
Cleaning
Clean the product after every use.
Never use scouring pads, abrasive cleaning
agents or aggressive liquids such as
gasoline or acetone to clean the product.
Do not tap the product or blade against a
surface to remove hairs and water as this
may cause damage to the product and
blade (Fig. 18). If the blade is damaged,
replace immediately.
Never dry the blade with a towel or tissue,
as this may cause damage.
Cleaning the product
1 Switch off the product.
2 Remove the comb from the blade (Fig. 17).
3 Blow off any hairs that have accumulated
on the blade and/or comb.
4 Switch on the product for approx. 15
seconds and rinse the blade with lukewarm
water.
5 Rinse the comb for approx. 15 seconds with
lukewarm water.
6 Carefully shake off excess water and let all
parts air dry completely.
Note: The blade is fragile. Handle it carefully.
Replace the blade immediately if it is
damaged.
This product has no other user-serviceable
parts. For assistance call 1-800-243-3050.
Storage
Storage in pouch
- Store the product in the pouch supplied.
Make sure the product is dry before you store
it in the pouch.
- Charge the battery before storing the
product for an extended period.
- Be sure the product is switched off. Remove
the power cord from power outlet and the
product before storing it in a safe, dry
location where it will not be crushed,
banged, or subject to damage.
- Do not wrap cord around the product
when storing.
- Store cord and other accessories in a safe
location where these will not be cut or
damaged.
loading