Caso Germany VC12 Manual Del Usuario página 45

Envasadora al vacío
Idiomas disponibles
  • ES

Idiomas disponibles

The bag does not hold
the vacuum after it has
been welded shut
Please note
► If you are unable to solve the problem with the steps shown above, please contact
Customer Service.
17 Disposal of the Old Device
Old electric and electronic devices frequently still contain valuable materials.
However, they also contain damaging substances, which were necessary for their
functionality and safety.
If these were put in the non-recyclable waste or were handled incorrectly, they could be
detrimental to human health and the environment. Therefore, do not put your old device
into the non-recyclable waste under any circumstances.
Please note
Utilise the collection point, established in your town, to return and recycle old electric
and electronic devices. If necessary, contact your town hall, local refuse collection
service or your dealer for information.
Ensure that your old device is stored safely away from children until it is taken away.
caso Vakuumierer VC12
The bag is defective
There are leaks along the
welding seam as a result of
creases, crumbs, grease or
liquids.
► Select another bag; wrap
paper serviettes around any
sharp edges on the content
► Open the bag again and clean
the upper internal part of the
bag and remove any foreign
matter that might be on the
welding bar before you weld
the bag shut again.
45
loading

Productos relacionados para Caso Germany VC12

Este manual también es adecuado para:

1341