Idiomas disponibles
Idiomas disponibles
The light does not work
Vibrations
The wine cooler seems to make too much noise
The door will not close properly
LED display is not working properly
In case of display of an error code (ie EE, LL or HH) unplug your appliance from the main power,
and contact your after sales service.
Replacing light
This appliance consists of light-emitting diodes (LEDs). This type of diode cannot be changed by the
consumer. The lifetime of these LEDs is normally sufficient for no change to be made. If however, and
despite all the care taken during the manufacture of your wine cellar, the LEDs were defective, please
contact your after-sales service for any intervention.
•
Not plugged in
•
The circuit breaker tripped or a blown fuse
•
The bulb has burned out
•
The light switch is "OFF"
•
Check to assure that the wine cooler is level
•
The rattling noise may come from the flow of the
refrigerant, which is normal
•
As each cycle ends, you may hear gurgling
sounds caused by the flow of refrigerant in your
wine cooler
•
Contraction and expansion of the inside walls
may cause popping and crackling noises
•
The wine cooler is not level
•
The wine cooler is not level
•
The gasket is dirty
•
The shelves are out of position
•
A part of the contents is preventing the door from
closing
•
Control panel failed
•
Power PCB has broken
•
The appliance is not plugged in
•
The probe is not working
43
