Idiomas disponibles
Idiomas disponibles
ENGLISH - Fixed frame screen user manual
Screens and their projection surfaces are delicate and must be cleaned with great care, according to the following instructions:
Never use solvents, chemical or abrasive products, or pointed tools to clean the surface.
Avoid contact with other materials (varnishes, inks etc) as they might be impossible to remove from the canvas.
FABRIC CLEARPIX: Use a soft, clean, dampened cloth, wiping from the center of the projection surface towards the outer edges. A vacuum-cleaner brush may be used, provided its bristles are soft and
perfectly clean.
FABRIC SOLIDPIX, MULTIPIX,: Remove dust from the case with a soft, clean cloth and a non aggressive detergent as necessary.
Clean the projection screen with a soft, clean, damp cloth, and a neutral or alcohol-base detergent as necessary. Since rubbing the screen with a cloth during cleaning operations can cause electrostatic
charge to accumulate, we recommend the subsequent application of an antistatic liquid with a clean cloth, to avoid dust being attracted again
FABRIC SILVERPIX is Mandatory to read the instructions accompanying the fabric screen
GENERIC PROFILE: Remove dust from the case with a soft, clean cloth and a non aggressive detergent as necessary
VELVET PROFILE: Clean profile with a soft clean cloth, or a brush with soft, antistatic bristles. A vacuum-cleaner brush may be used, provided its bristles are soft and perfectly clean.
STRUCTURE and ANCHORING BRACKETS: The state of the product and the anchoring capacity of its brackets must be checked regularly. In case of canvas deformation or rips, or loosening of structural
components such as brackets or screws, action must be taken immediately to clear the area around the screen and avoid hazard to people and things, replace the defective component and restore the
product's functionality.
WARNING: When installing the screen use plugs and screws suitable for the screen's weight and for the type of wall or ceiling on which the mount brackets are to be fixed, based on the
following criteria
Screen width up to cm
Overall weight
See images on the end pages of this manual
1.
insert the sliders in the single sections in the number shown on following; packaging includes 4 (2 horizontal + 2 vertical) sections.
2.
prepare the 4 angles by inserting the screws and bolts, without fastening them. See fig. 2.
3.
assemble the sections and angles together to form the frame. See fig. 3a-3b-3c-3d.
4.
if present, to install the Stiffeners See fig.4
5.
install the 4 brackets and mark on the wall the points where the supports must be attached, Fig. 5
6.
insert the reinforcement rings in the screen's buttonholes. tie the screen to the frame with the elastics provided. See fig. 6.
7.
Installation must take place on a vertical surface (wall, curtain wall, etc.), by means of the brackets provided in the packaging. screw the brackets to the wall, using screws and plugs that are suitable
for the relevant wall and adequate for the screen's weight. Once the brackets are mounted, hook the screen onto the brackets, as shown in fig. 7.
4:3 FORMAT
N° of sliders in
HORIZONTAL
PROFILES
177 PLANO
4
200 PLANO
5
217 PLANO
6
237 PLANO
X
257 PLANO
X
267 PLANO
8
317 PLANO
8
As is the case for installation procedures, when the product reaches the end of its useful life, disposal operations must be carried out by qualified personnel.
The product is made up of various types of material: some can be recycled, others have to be disposed of. You must follow applicable recycling or disposal regulations in
force in your area for this product category.
As shown in the picture on the left, you must not throw the product into a domestic litter bin. Either dispose of the various components separately, pursuant to the
regulations applicable in your territory, or hand the product over to a vendor upon purchasing a similar new product.
Warning: local regulations can foresee heavy fines in case of unlawful disposal of this product.
1.GUARANTEE LIMITATIONS The Manufacturer guarantees that all the products it distributes are free of production-, material- and processing-related defects, without prejudice to the following terms and
conditions:
* The product is guaranteed for a period of twenty-four (24) months
* Mechanical parts are guaranteed for a period of thirty-six (36) months
* The motors and remote controls (excluding batteries) are guaranteed for a period of thirty-six (36) months
as from the date of the purchase invoice/receipt released to the end user
2.CONDITIONS AND LIMITATIONS This guarantee is subject to the following conditions and limitations:
the guarantee shall be deemed null and void if: the product has been used or manipulated in any manner other than those indicated in the user manual's instructions; or damaged as a result of improper use,
or owing to accident or negligence during transport; or if the product's defect is the result of repair or manhandling on the part of anyone other than personnel authorized by our Customer Care office.
The product must be installed by trained and experienced insider professionals, following the instructions provided for the installation and maintenance procedures.
3.RETURNS No product shall be returned and accepted without an authorization (RMA) released by Customer Care.
Products must be returned in their original (or equivalent) packaging to avoid being damaged during transport. Any transport damages resulting from inappropriate packaging shall not be covered by this
guarantee.
The returned product shall be accompanied by a detailed description of the defect and by a photocopy of the original purchase invoice/receipt.
The purchase invoice/receipt shall clearly indicate the following: Model – Serial number – Purchase date – Name and address of the purchaser and authorized dealer.
Made by Adeo Screen sp. Z o.o. (Polska) Specifications are subject to change without notice. E&OE
Doc: PLANO CURVO Installation Manual rev2 | 23.10.2012
Please verify that you are working with the latest revision of this document before specifying your screen.
06 CLEANING AND MAINTENANCE
07 INSTALLATION INSTRUCTIONS
1610 FORMAT
N° of sliders in
N° of sliders in
VERTICAL
HORIZONTAL
PROFILES
PROFILES
3
4
4
5
5
6
X
X
X
X
5
8
6
8
PRODUCT'S DISPOSAL
177
200
217
237
Kg 13
Kg 13.5
Kg 14.5
Kg 15
16:9 FORMAT
N° of sliders in
N° of sliders in
VERTICAL
HORIZONTAL
PROFILES
PROFILES
3
4
4
5
4
6
X
6
X
6
5
8
5
8
GUARANTEE
257
267
317
Kg 15.5
Kg 16
Kg 17
21:9 FORMAT
N° of sliders in
N° of sliders in
VERTICAL
HORIZONTAL
PROFILES
PROFILES
3
4
4
5
4
6
4
6
4
6
4
8
5
8
N° of sliders in
VERTICAL
PROFILES
3
3
3
3
4
4
4
Page 5
