Bestron PURE&CLEAN AVC800 Manual De Instrucciones página 19

CLEANING AND MAINTENANCE - Cleaning or replacing the filter
For best results clean or replace the filter after every second or third use of the vacuum cleaner, or more
frequently if the filter is visibly blocked.
WARNING:
• Clean the filter regularly to avoid that the filter becomes clogged and the engine overheated.
1. Remove the plug from the wall socket.
2. Remove the telescopic interlocking tube from the vacuum cleaner.
3. Remove the waste from the dust container (see "Removing waste from the dust container").
4. Remove the dust container from the vacuum cleaner by pressing the release button (see figure 6A on
page 3) and taking out the dust container (figure 6B on page 3).
5. Turn the upper lid (4) and remove it from the dust container (figure 6C on page 3).
6. Take the dust separation system and filter from the dust separation system (figure 6D on page 3).
7. Rinse the filter and the dust separation system thoroughly in lukewarm water.
8. Allow the filter to dry thoroughly.
9. Mount the holders and filters in the reverse sequence.
WARNING:
• Water could penetrate into the appliance if the filter is not thoroughly dry. This could result in (electrical)
damage.
• Do not clean the filter in a washing machine.
• Do not dry the filter with a hairdryer.
19 19
EN EN