Idiomas disponibles
Idiomas disponibles
Thermoforming:
1. Selected foil
to 1. Correct foil?,
if yes, confirm.
In the display further
working steps are indi-
cated. The visualisation
disappears with the next
step.
Put the selected foil
in the foil reception
and clamp with the foil
securing ring.
5. Risk of crushing
to 5. Warning appears
shortly before and dur-
ing cylinder release.
2. Insert foil reception
to 2. Place foil recep-
tion with foil onto the
insertion ramp and
push it thus far under
the heater that it clicks
into place.
6. Cooling time
to 3. Air blowing noises
during the cooling time
serve for cooling.
Hint:
The function icon „X" stops the respective
process. Each abort must be confirmed.
3. Form pot in place?
to 3. Now place the
form pot with model
disc and the models
arranged on it on the
form pot table and
confirm (yes).
Await further device
function step.
4. Foil is heated
to 4. Only after
confirmation of 3.
the selected foil is
heated.
The further thermo-
forming process and
the movement of the
form pot are
automated.
7. Remove models
to 7. ... and confirm.
*Note on page 11!
9
