Wesco WS2901 Manual Original página 7

VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
surface grinding or abrasive cutting off
Cutting off
The declared vibration total value may be used for comparing one tool with another, and may also be used in a preliminary assessment of
exposure.
WARNING: The vibration emission value during actual use of the power tool can differ from the declared value depending on the
ways in which the tool is used dependant on the following examples and other variations on how the tool is used:
How the tool is used and the materials being cut.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of exposure level in the actual conditions of use should also take account of all parts of the
operating cycle such as the times when the tool is switched off and when it is running idle but not actually doing the job. This may
significantly reduce the exposure level over the total working period.
Help to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate)
If the tool is to be used regularly then invest in anti vibration accessories.
Plan your work schedule to spread any high vibration tool use across a number of days.
ACCESSORIES
Auxiliary Handle
Spanner
Quick Guard For Grinding
Battery Pack
Charger
We recommend that you purchase your accessories listed in the above list from the same store that sold you the tool. Refer to the accessory
packaging for further details. Store personnel can assist you and offer advice.
EN
Vibration emission value a
h,AG
Uncertainty K = 1.5 m/s²
Vibration emission value a
h,CO
Uncertainty K = 1.5 m/s²
WS2901
1
1
1
1
1
= 3.448 m/s
2
= 3.965 m/s
2
WS2901.9
1
1
1
/
/
7