Idiomas disponibles
Idiomas disponibles
PRODUCT INSTALLATION (cont.)
INSTALLING THE BIDET ATTACHMENT (cont.)
7 . Connect the Bidet Hose to the Bidet Attachment
a . Connect open end of bidet hose to the
connection underneath the bidet attachment .
8 . Turn on the Water Supply and check for leaks .
a . Open the main water supply valve slowly and
check for leaks .
b . Wait 5-10 minutes, check again and if there are
no leaks, continue .
NOTE:
• If there is any leaking, check all rubber washers and make sure all water
connections are tight and secure . If necessary, you can use the provided
Teflon Tape (Plumber's Tape) for any leaking connections .
8
Step 7a
