Stopping/Restarting Your Washer - Whirlpool 7LSR8244EQ0 Manual Del Usuario

OPER A T IN G YO U R W A S HE R
8. (OPTIONAL STEP) If desired, on
models with the End of Cycle signal
option, set the it to On if you want the
washer to alert you when the wash
cycle is complete.
•
If your model has an End of Cycle
signal, it is either a Rotary Knob or
CLEAN TOUCH* selector.
•
The signal is helpful when you are
washing items that should be removed
from the washer as soon as the
cycle ends.
9. Push in the Cycle Control Knob and
turn it clockwise to the wash cycle
you want. See pages 9 and 10.
10. Pull out the Cycle Control Knob to
start the washer.
11. (OPTIONAL STEP) If desired, on
models with no liquid fabric softener
dispenser, add measured liquid fabric
softener to the rinse water.
See page 15.

Stopping/restarting your washer

•
To stop the washer at any time, push
in the Cycle Control Knob.
•
To restart the washer, close the lid
(if necessary) and pull out the Cycle
Control Knob.
8
On
Off
Cycle Signal
Rotary Knob
OR
On Off
Cycle Signal
Options
CLEAN TOUCH
Selector