UGREEN GS1200 Manual De Usuario página 12

Troubleshooting
Indicator
OVERLOAD
Low-Temperature Protection
+F03
+F17
/
+F50
/
+F10/F12/
F49
F05
F22
F33
F36
F37 AC Charging Input Overvoltage
F38 AC Charging Input Undervoltage
DC Charging Input Overvoltage
F39
Note: In the case of an unsettled issue, please contact UGREEN Customer Service.
Problem
Output Overload
Charging High-
Temperature Protection
Temperature
Detection Failure
Discharging High-
Temperature Protection
Discharge Undervoltage
Protection
DC Output Failure
USB-A1 Output Failure
USB-A2 Output Failure
Solution
Remove all connected external devices from the
power station then restart the power station.
Move the power station to a working
environment temperature as previously specified
by this manual before continued use.
Method 1: Open the App to enable Quiet mode.
Method 2: Stop charging the power station, turn it
off and wait 10 minutes before resuming charge.
Please cease use immediately and contact
UGREEN Customer Service.
Remove all connected external devices from the
power station, place the power station in a cool
and well-ventilated environment, then wait 10
minutes. After 10 minutes, turn it on again.
Battery is low, please charge promptly
Please cease use immediately and contact
UGREEN Customer Service.
Please check whether input voltage is within the
appropriate voltage range required by this manual.
If the input voltage is normal, please contact
UGREEN Customer Service.
EN
10