Idiomas disponibles
Idiomas disponibles
Power Reduction Mode
In this mode, the recharging/discharging power of the power station is reduced. This is to improve the
overall lifespan of the power station.
For safe use, Power Reduction Mode will automatically turn on in the following 4 states:
1. Low temperature
2. High temperature
3. Low battery charging
4. Trickle charging
(The Power Reduction Mode icon on the LCD display illuminates to indicate that the mode is on.)
0% Battery Emergency Mode
This mode allows for flashlight and USB ports usage when battery level is at 0%.
When powered on, press and hold the DC Power Button and Flashlight Power Button for 10 seconds at the
same time to enable this mode. After use, press and hold the Main Power Button for 3 seconds to disable.
Tips:
· This mode is only available when the battery level is 0%.
· Please avoid using this mode frequently, as power station battery life could be negatively affected.
· After using this mode, promptly charge the power station, otherwise it may become unusable.
Operating Mode
Mode
In Standard Mode, the power station automatically
Standard
shuts down if there is no device connected and no
operation is performed within 5 hours after
Mode
powering on.
In Power-Saving Mode, the power station
automatically shuts down if there is no device
Power-Saving
connected and no operation is performed within 2
Mode
hours after powering on.
In Always-On Mode, the power station remains on
Always-On
until the battery is depleted or the power station is
Mode
manually turned off.
Factory Reset
To perform a factory reset, ensure the power station is not connected to any other device/appliances/etc.
Press and hold the AC Power Button and the DC Power Button simultaneously for 10 seconds to restore
the power station to factory settings.
Note:
This operation will clear all function settings saved by the power station. Perform reset with caution.
Description
Setting
Default mode
While power station is on,
double-press Main
Power Button to
enable/disable this mode
While power station is on,
press and hold AC Power
Button for 3 seconds to
enable/disable this mode.
EN
08
