Idiomas disponibles
Idiomas disponibles
TYPES OF FAILURES AND SOLUTION
Problem
The machi ne does not work ,
and indicator light does not
light
The effect is not good after
turn on the "COOL.:' mode
The air volume of the
machi ne is very small
Can not be controlled by the
remote control
Reason
1.The socket is broken;
2.The plug and socket have
been loosened;
3.The machine was damaged
during transportation.
1.The water level is too low;
2.The suction pipe of the water
pump is blocked;
3.The water inlet above the
wet curtain is blocked;
4.The wet curtain is not
installed correctly , causing the
water to flow back to the tank;
5.Relative humidity of the
environment is high.
1.The fan is in natural wind and
sleep wind mode
2.Air flow at the air inlet is
blocked;
3.lnsufficient supply voltage.
1.The battery is dead;
2.The re mote control is not
pointed at the sensor on the
machi ne or the sensor is
blocked.
Solution
1.Replace a socket;
2.Plug tight;
3.Contact the seller.
1.Add water;
2.Clean the water pipe;
3.Clean the water inlet above
the wet curtain;
4.lnstall the wet curtain
correctly;
5.When the relative humidity is
lower than 75% , the cooling
effect is most effective;
1.Adjust the "MODE";
2.Remove items behind the
machi ne to ensure proper air
circulation;
3.Ensure that the home circuit
is stable; contact the seller.
1.Replace the battery;
2.Make sure the channel
between the remote control and
the machine sensor is not
blocked by furniture or other
objects.
27
