Idiomas disponibles
Idiomas disponibles
User's Manual
Ⅵ、Safety Warnings
Warning! Do not damage the cooling fluid circuit.
Warning! Do not damage the walls of the machine: the cooling fluid circuit may be damaged.
Warning! Do not use electrical appliances inside the food storage compartments of the appliance,
unless they are of the type recommended by the manufacturer.
Warning! The equipment must not be used by persons (including children) whose physical,
sensorial, or mental capacities are reduced, or who lack experience and know-how, unless
they have been provided, by means of a person responsible for their safety, with suitable
monitoring or instructions about the use of the equipment. Children must be monitored to
ensure they do not play with the equipment.
Ⅶ、Use warnings
1. Unpack all packages before using the cooler. Do not tilt it over more than 60°, while moving it.
2. On its initial operation, the cooler should run emptily for about two hours before storing food in it.
3. The thermostat can adjust the temperature inside the cooler. When you turn the knob
clockwise, the bigger the number, the lower the temperature. Generally, the positions '3-4'
are suitable for regular operation. The '6' position has the appliance operating continually.
4. To save energy, the door should not be opened too frequently or left open for a long time.
5. The surface and the inside of the cooler should be dry and clean. Long term moisture will
cause the cooler to slowly rust. (There will be some stains on the surface.)
6. Periodical cleaning is suggested. Generally, cleaning the appliance once every 30-45 days is the
best. When cleaning, it is best to wipe the inside and the surface of the cooler with a soft cloth
with neutral soap or detergent.
Caution: To ensure safety, the power plug must be pulled out before cleaning.
Ⅷ、Cleaning the unit
For cleaning the unit's internal plastic parts, use a light solution of soap and water. Do not apply hard
chemical detergents on the plastics as they may lose their shine or even get deformed.
The same applies to the external metallic surfaces. The use of hard chemicals could harm the painting
of the metallic surfaces, affecting the sanitary protection of the unit.
Ⅸ、Troubleshooting
Please refer to the below troubleshooting lists to solve any minor problems that may occur during
operations.
