AVX 565 BT
NOTES OF USE
Listen at high volume for long periods of time, may damage your hearing.
Avoid using it in the following cases:
•
Near strong heat sources, such as central heating plants or stoves.
•
In very humid places such as bathrooms, swimming pools, etc...
•
In very dusty places or in places subject to strong vibrations.
•
Position the appliance in such a way that there is always enough room for free air circulation (at least 5cm).
•
Do not block the air inlets.
•
If any liquid enters the appliance, unplug it immediately from the socket and take it to the nearest TREVI authorised
service centre.
•
Before switching on the appliance, always check that the power cable and the connection cable are properly installed.
• No naked flame sources, such as lighted candles, should be placed on this.
• The apparatus shall not be exposed to dripping or splashing water and no object filled with water, such as vases, should
be placed on the unit.
•
Keep this manual for future reference.
CARE AND MAINTENANCE
For cleaning we recommend the use of a soft, slightly damp cloth. Avoid solvents or abrasives.
IMPORTANT
The good construction of this machine guarantees the perfect functioning for a long time. However, should any problem
arise, you should consult your nearest authorized service center.
COMMANDS DESCRIPTION
1. 100-240V ~ 50/60Hz supply socket
2. ON/OFF switch
3. Output connection for satellite speaker
4. AUX IN Ø3.5mm jack
5. Micro-SD Card input
6. USB input
7. MODE key, if pressed once it has the same function as
the PLAY/PAUSE key. If pressed for a long time it selects
the active input
8. VOL +/NEXT key, pressed several times increases the
volume, if pressed for a long time selects the next track
9. VOL -/PREV key, pressed several times decreases the
volume, if pressed for a long time it selects the previous
track
10. Headphone 3.5mm jack
11. Power/ Standby button
12. MUTE button
13. Volume control keys
14. PREV/NEXT keys
15. PLAY/ PAUSE button
16. BT button
17. TRE -/ + keys, high tone control
18. BASS -/ + keys, bass tone control
19. RESET key, default tone value
CONNECTING THE SPEAKERS
Connect the satellite speaker to the amplified speaker via
the socket (3).
POWER ON/OFF AND ADJUSTMENTS
1. Turn the ON/OFF switch (2) to the ON position to
switch on the appliance;
2. Adjust the general volume by pressing the buttons (8)
and (9) on the control panel of the amplified speaker or
using the buttons (13) on the remote control. Using the
MUTE button (12) it is possible to silence the device
immediately, press it again to resume listening;
3. Turn the ON/OFF switch (2) to the OFF position to
switch off the appliance;
4. Press the button (11) to switch the device to standby
mode, press it again to switch it on.
Note: after a certain time, in the absence of sound reproduction,
the device automatically switches to standby.
USB/SD MP3 PLAYER
1. Insert a micro-SD memory in the micro-SD card input
(5) or a USB device in the USB input (6);
Playback will start automatically;
2. Press the PLAY/PAUSE button (15) to stop playback
temporarily. Press it again to restart it;
3. Press the NEXT or PREV (14) button to move to the
next or previous track;
4. Press the MODE button to switch between the USB/
micro-SD (TF card)/Bluetooth inputs. The led next to
the MODE key on the loudspeaker keypad indicates the
selected source.
AUX IN
1. Connect an audio cable with a 3.5mm Jack socket (not
supplied) to the AUX input (4) located on the rear of
the amplified speaker and the other audio cable socket
to the line-out output of a audio source;
2. Press the MODE button (7) to switch to the AUX input.
BLUETOOTH
1. Press the BT button to switch to the Bluetooth function
(BT/AUX LED on flashing);
2. The pairing mode will be activated, start the Bluetooth
function on the device to be paired and search for the
speaker named "AVX 565 BT";
3. Once the coupling has been completed, the LED indicator
will remain blue;
4. Use the PLAY/PAUSE (15), NEXT and PREV (14) keys to
control BT device.
TONE CONTROL
1. Using the keys (17) it is possible to adjust the high tones.
2. Using the keys (18) it is possible to adjust the bass tones.
HEADPHONE
1. Insert the headphones into the headphone jack (10);
2. Turn on the unit and adjust the volume.
TECHNICAL FEATURES
Maximum Audio power: .......................... 50W
Frequency response: .................................. 60Hz-20KHz
Bluetooth transmission power: .............. 2,5mW
Bluetooth transmission frequency: ........ 2,4GHz
Remote control battery: .......................... CR2032
Power supply: ............................................. 100-240V~ 50 / 60Hz
Unit dimensions: ........................................ 115x185x159mm
6
ENGLISH
