Once the voltage rises to ≥5.25V (for 6V batteries) or ≥10.5V (for 12V batteries) charger changes
over to previously selected charging mode. Now the battery can be charged faster and safer.
Most drained batteries can be charged and used again using this procedure. Rescuing process
terminates within 2 hours ± 15 mins.
abnormality Protection
In case of short-circuit, open circuit, reversed polarity connection or battery voltage below 1.0V
(for 6V batteries) or below 8V (for 12V batteries), the charger will turn-off the electronic system
and will immediately reset the system back to basic position to avoid damage to battery and
charger.
overheating Protection
This Carpoint charger is protected by NTC control. During the charging process, if the charger
becomes too hot, the power output is automatically reduced to protect itself from damage.
The charger continues to work trickle charge. Charger increases power automatically when the
ambient temperature drops.
BuLk chargIng tIme
Battery
For about 80% charge (hours)
Size
(ah)
1.2
2
7.2
10
12
20
30
40
50
60
Note: Above table is for reference only. Actual data may differ due to battery condition.
6v
12v
3
4.5
15
15
20
20
25
25
40
60
80
100
120
9