Idiomas disponibles
Idiomas disponibles
7.
Center tabletop on top of cabinets. Back side of
top should be flush with the edge of the cabinets.
Attach tabletop to support brackets using drill
with Phillips head drill bit or 10 mm drill bit socket
attachment and six wood screws. (See Figure 7)
NOTE: There will be tabletop overhang when
attaching the 72" tabletop.
Figure 7
Tabletop
8. Carefully recheck all screws for tightness.
WORKBENCH ASSEMBLY (FOR H-11258,
H-11259)
1.
Spread apart two cabinets. Each cabinet has four
pre-threaded inserts on both sides. Attach support
bracket to outside and inside of both cabinets using
four M6 x 20 mm bolts per bracket. (See Figure 8)
Figure 8
PAGE 3 OF 9
ASSEMBLY CONTINUED
2. Center tabletop on top of cabinets. Back side of top
should be flush with the edge of the cabinets and
sides of top should be flush with edge of support
brackets. Attach tabletop to support brackets using
drill with Phillips head drill bit or 10 mm drill bit socket
attachment and twelve wood screws. (See Figure 9)
Figure 9
3.
1-800-295-5510
uline.com
NOTE: Spacing between cabinets may need to
be adjusted to correctly fit top.
Carefully recheck all screws for tightness.
1123 IH-11258
