Idiomas disponibles
Idiomas disponibles
English
Installation
Before Installing the Hob
•
Ensure that the work surface is square and level, and there are no structural or other obstructions
that interfere with the space requirements.
•
Certify that the work surface is of a heat-resistant and insulating material.
•
If the hob is installed above an oven, check that it has a built-in cooling fan.
•
Ensure that the installation will meet all clearance requirements and applicable standards and
regulations.
•
Ensure that a suitable isolation switch providing total disconnection from the mains supply is in-
corporated in the permanent wiring, mounted and fitted in accordance with local wiring rules and
regulations.
•
The isolating switch must comply with electrical regulations and provide 3 mm contact separation
on all poles.
•
The isolating switch must be easily accessible to the customer with the hob installed.
•
If in doubt about the installation, please consult. SAT PANDO
Precautions
•
The induction hob must be installed by qualified personnel or technicians. We have professionals
at your service. Please never carry out the operation on your own.
•
The hob SHALL NOT be installed directly above a dishwasher, refrigerator, freezer, washing ma-
chine or clothes dryer, as moisture may damage the electronics of the hob.
•
The wall and induced heating zone above the table surface must withstand the heat.
•
To avoid any damage to the adhesive they must be heat resistant.
•
A steam cleaner should not be used.
Before placing the staples.
The appliance should be placed on a stable and smooth surface (use the packaging).
Adjustment of the staple position.
Secure the countertop to the work surface by inserting 2 to 8 staples on the underside of the
board (see image) prior to installation.
Adjust the staple position to accommodate different tabletop thicknesses.
156 Pando
Integral Cooking
Pando Induction hob
