Idiomas disponibles
Idiomas disponibles
5g
Battery symbol
5h
Brush block indicator
The display will be off about 10 minutes after the unit is fully charged.
MAINTAINING & CLEANING
All the maintenance must be held after the unit is shut off. Clean the dust cup regularly
to avoid any problems. It is recommended to dry storage and not to put heavy things on
the unit.
Cleaning the dust container: (FIG. 8)
1. Press the dust container release button to take the dust container out.
2. Press the dust release button to open the bottom cover and expel trash. Wipe to
clean the dust container, do not immerse in water.
Cleaning the filter: (FIG. 9)
1. Remove the dust container from the main body.
2. Hold the filter and pull it out upwards from the dust container.
3. Lift to remove the sponge filter and high-efficient filter.
4. Rinse the filters thoroughly under the running cold water. Do not use soap or other
cleaning solvents.
5. COMPLETELY air dry the filters before reassembling. Do not use hair dryer to dry the
filter. This may cause the filter to warp.
Filters re-assembly: (FIG. 10)
Important: Make sure the filters assembled rightly, otherwise, the fine dust will come
into the motor and destroy it.
Fix the filters into the dust cup and make the right way to fix them as it is shown on the
picture (Fig. 10).
Cleaning the roller brush: (FIG. 11)
1. Remove the motorized power brush from the main unit before cleaning the roller
brush.
2. Release the button and pull it out.
3. Rotate the cover and pull out the roller brush.
4. Carefully clean and remove the hairs and debris from the brush roller. Wipe to clean
only, do not use any soap or harsh cleaning solvents.
5. If roller brush becomes damp, allow to dry naturally before replacing.
26
It is flashing when the unit needs to be char-
ged: the blue light is flashing during charging
and remains blue when it is fully charged
The LED brush error lock is flashing when the
brush is locked by some foreign matter that
needs to be cleaned and the unit is OFF
