Idiomas disponibles
Idiomas disponibles
Accessories assembly:
Long crevice nozzle
Features a narrow nozzle that makes quick work of vacuuming tight spaces such as
corners and hard to reach areas.
1. Firstly, with the appliance OFF, insert the long crevice nozzle into the main unit via
the connector. It will "click" into place (FIG. 3).
2. Switch on the appliance and vacuum.
2 in 1 mini corner and furniture brush
Use this for vacuuming fabric furnishings such as sofas armchairs and curtains.
Firstly, with the appliance OFF, insert the 2 in 1 mini brush into the main unit via the
connector. It will "click" into place.
Switch on the appliance and vacuum.
Mini turbo brush accessory (**)
Ideal for removing dirt, especially pet hair from sofas, beds and upholstery. Insert it
into the main unit, it will click into place. Turn on and vacuum.
PetCare accessory (*):
This accessory is specially designed to comb and vacuum your pet's hair.
1. Firstly, with the appliance OFF, insert the flexible hose into the main unit an attach
the vacuum brush.
2. Select the desired comb for long or short pet's hair and fix it. It will "click" into place.
3. Switch on the appliance, and gently comb your pet's hair by following the direction
of hair growth (never against the grain). Repeat this step several times until the comb
will be full of hair.
4. Press the button on vacuum brush. The tab will move onwards, and the hair will be
vacuumed. Note: if there is a lot of hair, press the suction button several times.
(*) available on Inspire U7 Digital Animal and Inspire Z7 Digital Animal models.
(**) available on Inspire U7 Digital Pro model
BEFORE FIRST USE
1. Put the unit to the wall mount.
2. Ensure that the air vent and suction pipe are free from blockages and dust. Should
they suddenly clogged, switch off the appliance immediately and clear the blockage
before attempting to use the vacuum again.
3. Remove any sharp or large objects from the path before using this vacuum as these
may damage the appliance irreparably.
Battery charging:
Important: The handheld vacuum cleaner will not work when it's charging.
1. Place the unit near an electrical power outlet and plug in the charger. (FIG. 4)
2. Connect the charger to the charging socket. The battery status indicator lamp will
dynamically shine to indicate that the vacuum cleaner is property connected to the
charger and that the unit is being charged.
3. When it is fully charged, "100" will be shown on the display screen and the blue light
on the battery pack will be permanent on. The screen will shut off 10 minutes after fully
24
