Idiomas disponibles
Idiomas disponibles
The shipping carton for your painting system contains the following:
• Suction tube and return tube
• Pump cleaning adapter
• Spray gun with filter
• Spray tip assembly
• 25', 1/4" diameter pressure hose
ON/OFF Switch. . . . . . . . . . . The ON/OFF switch turns the power to the sprayer on and off (O=OFF, l=ON).
Suction Tube . . . . . . . . . . . . Fluid is drawn through the suction tube into the pump.
Fluid Section . . . . . . . . . . . . A piston in the fluid section moves up and down to create the suction that draws fluid through the
Spray Gun. . . . . . . . . . . . . . . The spray gun controls the delivery of the fluid being pumped.
Spray Hose . . . . . . . . . . . . . . The spray hose connects the gun to the pump.
Return Tube . . . . . . . . . . . . . Fluid is sent back out through the return tube to the original container when PRIME/SPRAY knob is in
Pump Cleaning Adapter . . . The adapter allows you to attach a garden hose to the suction tube for easy cleanup (latex materials
PRIME/SPRAY Knob . . . . . . The PRIME/SPRAY knob directs fluid to the spray hose when set to SPRAY or the return tube when set
Pressure Control Dial . . . . . The pressure control dial regulates the amount of force the pump uses to push the fluid.
Pusher Stem . . . . . . . . . . . . . The pusher stem is designed to keep the inlet valve open and from sticking due to dried materials.
Capacity
PF23 .........................Up to .25 gallon (0.95 liter) / minute
PF30 ........................Up to .30 gallon (1.13 liters) / minute
Power source
PF23 .........................1/2 Hp universal motor
PF30 .........................5/8 Hp permanent magnet DC motor
Power requirement.........15 amp minimum circuit on 115 VAC,
60 Hz current
English
Components and Description
Controls and Functions
suction tube.
PRIME position.
only).
to PRIME. The arrows on the PRIME/SPRAY knob shows the rotation directions for PRIME and
SPRAY.
The PRIME/SPRAY knob is also used to relieve pressure built up in the spray hose (see Pressure
Relief Procedure, page 7).
Specifications
Components
• Separating Oil
• Instruction manual
• Hose bracket (all cart units)
• Pail bracket (all cart units)
Generator ........................8000 Watt
Safety features................Spray gun trigger lock and pressure
Capability ........................Sprays a variety of paints, oil base
4
diffuser; built-in tip safety guard;
PRIME/SPRAY knob for safe pressure
release.
latex, primers, stains, preservatives
and other nonabrasive materials,
including pesticides and liquid
fertilizers.
This pump should not be used with
textured materials, block filler, or
asphalt sealer.
