Idiomas disponibles
Idiomas disponibles
e
;
EST
mae
ex
os
may
$i
Eee
sists
es
Se
AGERE
it
asp
PROGRAMMED EDIT RECORDING
4 Press the numeric buttons on the remote control
to designate the tape length.
10 to 99 minutes can be specified.
Example:
When
using a 60-minute tape, press the 6 and 0
buttons.
DISPLAY
@ Tape length
@® Tape side A (front side)
@® Maximum recording time for side A
5 Press one of the DISC DIRECT PLAY buttons to
select a disc and press the numeric buttons to
program a track.
Example: To select the 10th track of disc 2, press DISC
DIRECT PLAY 2 and the numeric buttons +10 and 0.
DISPLAY
@ Remaining time of side A
@® Total number of programmed tracks
® Programmed tracks
6 Repeat step 5 for the rest of the tracks for side A.
A track whose playing time is longer than the remaining time
cannot be programmed.
7 Press the EDIT/CHECK button to select side B
and program the tracks for side B.
:
After confirming that B is shown on the display, repeat step 5.
8 Press the @/O REC/REC MUTE button and then
press the <>
button within 2 seconds to start
recording.
The tape is rewound to the beginning of the front side, the
lead segment is played through for 10 seconds, and then
recording starts. After recording on the front side (A) ends,
recording on the back side (B) starts.
To stop recording
Press the ll button. Recording and CD play stop simultaneously.
To check the order of the programmed
track numbers
=
Before recording, press the EDIT/CHECK button to select side
Aor B, and press the «#4 or ®
button repeatedly.
@ Tape side
@ Program number
@ Programmed track numbers
@ Track number
To change the program of either side
Press the EDIT/CHECK button to select side A or B, and press.
the Hf CLEAR button to clear the program of the selected side.
Then program tracks again.
- To clear the edit program
Press the ll button twice so that EDIT disappears on the display.
Recording is inhibited if the erasure prevention tab on either side
of the tape is broken off.
