EN Installing the Battery
NOTE: lf your detector does not work properly, check the batteries to
make sure they are still good and are properly inserted.
1. Open the battery cover (7) by simultaneously pressing the top of the
pocket slip (6) and sliding the battery cover (7) out.
2. Insert two AAA batteries (Ensure the correct polarity).
3. Replace the battery cover (7).
Operation
Checking the AC electrical voltage in a socket.
WARNING: Risk of Electrocution. High-voltage circuits, both AC and
DC, are very dangerous and should be measured with great care.
WARNING: Risk of Electrocution. Before using to check for voltage in
a socket, always test the detector on a known live circuit to verify that
WARNING: Risk of Electrocution. Keep hands and fingers on the
18_s1_s12_5059340161914_BODNER_A6_IM_Multi_V05.indd 15
18_s1_s12_5059340161914_BODNER_A6_IM_Multi_V05.indd 15
EN Use
the detector is working properly.
body of the detector and away from the probe tip.
WARNING: Test on known live circuit before use.
7
6
15
4/11/2021 10:50
4/11/2021 10:50
