Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ASSEMBLY STEP 1
PART
TYPE
A
HEX SOCKET BOLT
B
BOLT
C
SPRING WASHER
D
FLAT WASHER
4
C
A
D
15
B
10
HARDWARE FOR STEP 1
DESCRIPTION
M8X1.25PX11L-D10X13.2L
M8X1.25PX80L-20L
8.2X15.4X2.0T
8.4X15.5X1.6T
2
4
B
D
C
A
1
A
Cut the yellow banding straps and lift the running
deck upward from the rear to remove all contents from
QTY
underneath the running deck.
2
B
Open HARDWARE FOR STEP 1.
8
C
Insert 2 BOLTS (A) into MAIN FRAME BRACKETS (15).
8
D
Pull the CONSOLE CABLE (2) away from the treadmill
8
base frame. Connect the CONSOLE CABLE (2) from the
MAIN FRAME (1) to the CONSOLE CABLE (2) in the
bottom of the RIGHT CONSOLE MAST (4). The other
end of the CONSOLE CABLE should be located at the
top of the mast.
E
Attach RIGHT CONSOLE MAST (3) to MAIN FRAME
(1) using 4 BOLTS (A), 4 FLAT WASHERS (C) AND 4
SPRING WASHERS (D)
NOTE: Be careful not to pinch the console
cable while attaching the right console mast.
F
Repeat STEP E on the RIGHT SIDE.
NOTE: Do not fully tighten bolts until STEP 6.
A
C
D
B
Tabla de contenido
