Samsung 5 Serie Manual Del Usuario página 25

Settings can be adjusted and stored for each external device you have connected to an input of the TV.
In PC Mode, only IG:9 and 4:3 mode can be adjusted.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
@
@
@
@
ATV, Video, Component (480i, 480p) 16:9, Zoom1, Zoom2, 4:3
Component (720p) 16:9, Wide Fit, 4:3
DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080p) 16:9, 4:3, Wide Fit, Screen Fit
PC 16:9, 4:3
Digital NR
If the broadcast signal received by your TV is weak, you can activate the Digital Noise
Reduction feature to help reduce any static and ghosting that may appear on the screen.
• Off: Turns the Digital NR function off.
• Low: Sets Digital NR to low.
• Medium: Sets Digital NR to medium.
• High: Sets Digital NR to high.
• Auto: Sets Digital NR to Auto.
HDMI Black Level
You can directly select the black level on the screen to adjust the screen depth.
• Normal: The screen gets brighter.
• Low: The screen gets darker.
@ This function is active only when an external device is connected to the TV via HDMI.
HDMm Black Level function may not be compatible with all external devices.
Film Mode
The TV can be set to automatically sense and process film signals from all sources and
adjust the picture for optimum quality.
• Off: Basic video image processing applied and No auto-detection for film-based
programs.
• Auto: Automatically adjusts for the best image quality between film and video programs.
• Cinema Smooth: Cinema Smooth reproduces film cinema video with greatly reduced or without visible motion judder, as you
see it in the movie theater. (PN50B560TSF/PN58B560TSF/PN63B590TSF only)
@ Only if HDM11080p 24Hz signal is input, Cinema Smooth function is activated and you can set ON/OFF.
@ Film mode is supported in TV, Video, Component (480i / I080i) and HDMI (1080i).
Screen Burn Protection
Configures the Screen Burn Protection options to prevent and reduce pixel burn.
When an image remains in one position too long, it may cause a permanent burn on the
screen.
Preventing Screen Burn-in
To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This
technology enables you to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot).
The Time setting allows you to program the time between movement of the picture in minutes.
• Pixel Shift : Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to prevent after-
images on the screen.
Optimum condition for pixel shift;
Horizontal 0~4 4
0-4 4
Time(rain) l~4min. 2 min
Side Gray : When you watch TV with the screen ratio of 4:3, the screen is prevented from any damage by adjusting the white
balance on both extreme left and right sides. To prevent the screen burn from happening, select Dark or Light.
- Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.
- Light: When you set the screen ratio to 4:3, it brightens the left and right sides.