Idiomas disponibles
Idiomas disponibles
PROBLEM
POSSIBLE
CAUSE
The machine
The diameter of
does not reach
garden hose is
high pressure.
too small.
Water supply is
restricted.
The water sup-
ply is not suffi-
cient.
Spray tip has
not be installed
onto the spray
wand properly.
The water in-
take filter is
clogged.
English
SOLUTION
PROBLEM
Replace with a
1" (25 mm) or
5/8" (16 mm)
garden hose.
Check garden
hose for kinks,
leaks, and
blockage.
Open the water
supply fully.
Install desired
spray tip to end
of wand.
The output
Remove filter
pressure varies
and rinse in
high and low.
warm water.
13
POSSIBLE
SOLUTION
CAUSE
The water sup-
Open water
ply is not suffi-
supply fully.
cient.
Check garden
hose for kinks,
leaks, or block-
age.
The pump is
1.
Make sure
drawing in air.
that the
hoses and
fitting are
airtight.
2.
Turn
"OFF" ma-
chine.
3.
Purge
pump by
squeezing
trigger gun
until a
steady
flow of wa-
ter comes
out the
spray tip.
The water in-
Remove the fil-
take filter is
ter and Rinse in
clogged.
warm water.
The supply volt-
Make sure that
age is low.
only the pres-
sure washer is
running on the
circuit.
The gun, hose
Run distilled
or nozzle are
vinegar through
calcified.
detergent tank.
EN
