Idiomas disponibles
Idiomas disponibles
EN
SPRAY TIP
APPLICATION
Green - Narrow fan tip (25° )
• The green pressure washer tip
O
25
White - Wide fan tip (40° )
• The white 40 degree tip, referred
O
40
Black - Soap spray tip
• The black soap spray tip, is used
SOAP
Turbo nozzle tip
• The nozzle rotates in a zero to
4.3.2 INSTALL THE SPRAY TIP
1.
Pull back the quick-connect collar (19) on the
spray wand (4).
2.
Insert the spray tip (18) onto the spray wand (4).
3.
Release the quick-connect collar (19) to attach
the spray tip (18).
4.
Pull on spray tip (18) to ensure it is properly
installed and does not pull out.
provides high versatility with its
25 degree angle tip. Referred to
as the washing tip, because it
provides adequate pressure to re-
move dirt from surfaces, but is
designed to not damage many
surfaces. This pressure washer
tip is designed for "sweeping" fo-
liage or debris given its wide an-
gle. This tip is versatile due to its
wide area of cleaning and strong
pressure application.
to as the "fan" tip creates the
widest area of cleaning with rela-
tively low pressure. This pressure
washer tip is best used for light or
delicate cleaning applications. It
is recommended for light cleaning
on wood decks and other soft or
delicate surfaces.
for soap application. Soap is ap-
plied under low pressure high vol-
ume for optimum performance.
Soap cannot be applied under
high pressure with this machine.
15 degree spray pattern in a cir-
cular motion to break down tough
dirt and grime. The spray pattern
can cover area of 4 to 8 inches
wide, depending on a distance
between the tip and the surface
being cleaned.
English
4.4
ADD DETERGENT
Do not use household detergents, acids, alkalines,
bleaches, solvents, flammable material, or industrial
grade solutions, which can do damage to the pump.
Read the instructions on the solution bottle to
prepare detergent.
If it is necessary, use a funnel to prevent the spill of
detergent. Clean and dry the spilled detergent when
you fill the tank.
Soap/detergent can only be applied with this
machine when the black nozzle(75 degree) is
installed.
1.
Place the pressure washer upright on a flat
surface.
2.
Open the cap on the detergent tank (6).
3.
Pour detergent into tank (6).
4.
Reinstall cap.
Do not let detergent dry on the surface to prevent
streaks.
10
6
WARNING
WARNING
NOTE
NOTE
NOTE
