Acer 3 Serie Manual Del Usuario página 12

XII. RIDE AND SAFETY
A learning process is necessary for the use of this device. A use of it
without a correct learning process can cause injuries. Use protections
to prevent damage. Once you complete these steps you can turn on
the electric scooter:
BRAKE ADJUSTMENT
Before every ride check brakes. If you feel the brake is too tight, use
the hex wrench counterclockwise to loosen the screws on the pressure
plate on the disc brake seat, release the brake line to shorten slightly
the exposed length and tighten the screws of the pressure plate. If you
feel that the brake is too loose, release the screws on the pressure
plate, drag the brake cable to slightly lengthen the length and then lock
the screws on the pressure plate.
WARNING! When hard braking, you risk serious injury due to loss of
traction and falls. Maintain a moderate speed and look out for potential
hazards.
FOLDING AND TRANSPORTATION
Once folded hold the electric scooter by the bar to transport it as
indicated in the figure:
EN-11