Idiomas disponibles
Idiomas disponibles
Product assembly and disassembly
Noted: Cut off electricity before product assembly and
disassembly.
Floorhead assembly and disassembly
To install the floorhead assembly, first align the bottom
of the mainbody assembly with the head of the floorhead
assembly, insert it down on the floorhead, and push it in
until a "click" sound is heard; To take out the floorhead
, place the machine on the ground, hold the floorhead
with one hand and press floorhead release button with
the other hand, lift the mainbody up, and remove the
floorhead assembly.(Fig 1)
Metal tube assembly and disassembly
Insert the metal tube into the mainbody vertically until
a"click"sound is heard. Make sure metal tube is firmly
locked. To disassemble the metal tube, Remove battery
pack and the use a hard tool like a screw driver to insert
into the handle release hole and meanwhile pull out the
metal tube upward.(Fig 2)
Assemble and disassemble battery pack
1. Slide battery pack along the slot and press the battery
pack down firmly until a"click"sound is heard. The
battery pack is locked.
2. Press the battery pack release button and pull the
battery pack in the direction opposite to the assembly
to unlock the battery pack.(Fig 3)
Note: Except for the replacement of the battery pack,
the battery pack doesn't need to be taken out frequently.
Dirty water tank assembly and disassembly
To assemble dirty water tank, place dirty water tank
bottom into mainbody, push dirty water tank towards
mainbody until a "click" sound is heard.
To take off dirty water tank, hold machine with one hand
and hold dirty water tank with another hand, press dirty
water tank release button to pull out dirty water tank. (Fig 4)
Charge base assembly
Press charging base upper, cleaning solution housing, and brushroll housing to the charging base lower along
the illustrated position until a "click" sound is heard. (Fig 5)
Place machine to charging base
Make sure floorhead is in upright position, hold machine handle to lift the machine, aim charging slot on
bottom of machine to the charging socket on charging base and put the machine into charging base. To use
the machine, hold machine handle and lift out machine from charging base (Fig 6)
1
2
3
4
Charging
base upper
Charging
5
base lower
Floorhead
release button
Metal tube
release hole
Battery
release button
Dirty water tank
release button
Brushroll
housing
Cleaning
solution housing
5
