Chapter 3 Cleaning and
Maintenance
Dirty water tank cleaning
1. When dirty water tank is full, the dirty water tank full
indicator on LED screen will blink.The machine will
stop working immediately and has voice reminding
"Dirty water tank full, please empty tank".
2. After turning off the vacuum cleaner, remove the dirty
water tank, lift the water tank top cover, and remove
the foam filter frame from it, open the flip cover of the
foam filter frame, take out the foam filter. Pour out
dirty water and dirt in the water tank, then wash dirty
water tank, water tank cover, foam filter frame and
foam filter. (Fig 14)
3. If there is foreign matter in the dirty water tank pipe, it
can be cleaned with the cleaning brush
4. Dry the above parts after washing. And then reassemble all the parts back into dirty water tank.
Note:
1. When the machine is not in use, the upper cover of dirty water tank should be taken out for airing to avoid
odor.
2. After the machine has finished working, it is recommended to clean the dirty water tank immediately to
avoid odor.
3. After cleaning the upper cover of the dirty water tank, the metal contact sheet on the top cover of the dirty
water tank must be wiped dry before use
Floorhead cleaning
After removing the brushroll window, brushroll, clean water tank, and dirty water tank, insert the
multifunctional cleaning brush through the circular hole below the installation position of the dirty water tank
to clear foreign matter and scales in the pipe, and the clogged hair; Use the multi-functional cleaning brush to
cut off the tangled hairs on the brushroll; Wipe the machine and the dirty parts removed with a rag, and then
put it back on the machine separately (the brushroll can also be put into the brushroll box to dry); Rinse off the
dirt attached to the multi-function cleaning brush and place it in the brushroll box.(Fig 15)
Note: Do not wash floorhead!
Maintenance and Storage
1. Please turn off the machine before the cleaning.
2. It is recommended to clean the dirty water tank, filter, brushroll and brushroll window after each use. The
machine will stop working if the dirty water reaches MAX line.Please drain the dirty water tank immediately. After
the accumulated use time of the filter reaches 30-50 hours (various basing on filter status), replace the filter to
avoid affecting machine performance. Filter can be bought from local distributor.
3. When the machine is long idled, place it in a cool and dry place, avoid direct sunlight or wet environment.
4. When pack and store the machine, Please be sure to clean the machine and dry all parts to prevent damage to
the machine.
10
14
Dirty water
tank cleaning
Floorhead
cleaning
15