Enlaces rápidos

Assembly & Installation Instructions
all-in-one laundry sink
and cabinet
white
Model # / Modelo #
LT2036WWHD
Part
Description
Pieza
Descripción
A
B
C
D
E
Questions, problems, missing parts? Before returning to your retailer, call our customer service
department at 1-855-HD Glacier, 8 a.m.-6 p.m., EST, Monday-Friday. www.HOMEDEPOT.com
¿Preguntas, problemas, piezas faltantes? Antes de volver a la tienda, llame a nuestro departamento
de servicio al cliente al 1-855-HD Glacier, de lunes a viernes de 8 a.m. a 6 p.m., hora del Este.
www.HOMEDEPOT.com
Pg 1 of 10
Quantity
Cantidad
Sink Basin
Fregadero
Cabinet Body
Cuerpo del gabinete
Doors
Puertas
Knobs
Perillas
Knob Screws
Tornillos para perilla
Instrucciones de ensamble e instalación
fregadero para lavado de ropas
y gabinete todo en uno
Part
Pieza
F
1
Protección de manguera con jabonera
G
H
1
2
2
2
MCS
9/14/2015
blanco
Description
Descripción
Hose Guard with Soap Dish
Allen Wrench
Llave hexagonal
Top Trim Piece
Pieza de terminación superior
www.HOMEDEPOT.com
Quantity
Cantidad
1
1
1
IS2036
loading

Resumen de contenidos para Glacier bay LT2036WWHD

  • Página 1 Assembly & Installation Instructions Instrucciones de ensamble e instalación all-in-one laundry sink fregadero para lavado de ropas and cabinet y gabinete todo en uno white blanco Model # / Modelo # LT2036WWHD Part Description Quantity Part Description Quantity Pieza Descripción...
  • Página 2 Model # / Modelo # LT2036WWHD Part Description Quantity Part Description Quantity Pieza Descripción Cantidad Pieza Descripción Cantidad Hinge Bisagras Faucet Kit Kit de grifos Mounting Plates Placas de montaje Plumbing Kit Kit de conexiones Strainer Kit Bumper Strips Kit del colador...
  • Página 3 Model # / Modelo # LT2036WWHD 1. Strainer Kit (Q) / Kit del colador (Q) plumbers putty masilla de plomero Disassemble strainer kit (Q), by unscrewing locknut (4) and removing rubber washer (2) and the paper washer (3). Unscrew nut and remove tailpiece washer from strainer kit (Q). NOTE: Tailpiece washer will be used in step 7.
  • Página 4 Model # / Modelo # LT2036WWHD Faucet Kit (O) / Kit de grifos (O) faucet handle on the right Fig. 1 Fig. 2 mango del grifo a la derecha NOTE: Faucet (2) must be installed with the faucet handle on the right.
  • Página 5 Model # / Modelo # LT2036WWHD flat edge facing up borde plano hacia arriba Attach top trim piece (H) to cabinet body (B) with trim screws (S). NOTE: Finished edges of cabinet body (B) face away from wall. Attach the feet (N) to cabinet body (B), as shown. Re-attach the screw cap (2) to the the large bolt (1).
  • Página 6 Model # / Modelo # LT2036WWHD Fig. 1 Fig. 2 Fig. 3 Fig. 1: Fasten hinges (I) to doors (C) with hinge screws (L). DO NOT OVERTIGHTEN. Fig. 2: Fasten mounting plates (J) to cabinet body (B) with mounting plate screws (M). NOTE: Long side of mounting plates (J) points to the front of the unit.
  • Página 7 Model # / Modelo # LT2036WWHD NOTE: WALL MOUNTING IS RECOMMENDED (MOUNTING HARDWARE NOT INCLUDED). Warning: Before cutting, drilling or hammering into any wall surface, verify the location of electrical, plumbing and gas lines. Cutting any of these may cause serious injury. NOTE: Wall mounting is recommended. Place the cabinet body (B) in the desired position.
  • Página 8 Model # / Modelo # LT2036WWHD silicone caulk/sealant masilla/sellador de silicona Place a bead of silicone caulk/sealant around the top edge of the cabinet body (B), as shown. Carefully set sink basin (A) into cabinet body (B). Fasten knobs (D) to the doors with knob screws (E). Insert screw caps (R) into each exposed screw head on the cabinet body (B).
  • Página 9 Model # / Modelo # LT2036WWHD Plumbing Kit (P) / Kit de conexiones (P) NOTE: Plumbing should be done by a qualified plumber and in accordance with National and Local Plumbing Codes. NOTA: Las conexiones deben ser realizadas por un fontanero autorizado y según los códigos de fontanería...
  • Página 10 Model # / Modelo # LT2036WWHD TROUBLESHOOTING / SOLUCIÓN DE PROBLEMAS Remove the faucet strainer and attach the garden Correct assembly of the connecting pipe (8) and hose (4) to the faucet (1) as pictured below. hose adapter as pictured below.