Idiomas disponibles
Idiomas disponibles
10. Maintenance and Service
Attention! Maintenance work may only be completed when the main switch is set to
Off, the power plug has been unplugged and the device has cooled down!
10.1 Emptying the Waste Bin
Note! Check the fill level of the waste bin through the viewing window at regular inter-
vals and when it is about 80% full, empty it. This prevents the shredded material from
accumulating, which could lead to malfunctions.
1. Slide the main switch to Off.
2. Disconnect the power plug from the power socket.
3. Use the handle to lift the shredder attachment from the waste bin.
4. Empty the waste bin.
Caution! Risk of injury through sharp edge of cutting mechanism.
The underside of the shredder attachment has sharp edges.
Only take hold of the cutting mechanism using the handle.
5. Mount the shredder attachment on the waste bin.
10.2 Cleaning
1. Slide the main switch to Off.
2. Disconnect the power plug from the power socket.
3. Clean the surfaces of the housing with a cloth which is slightly damp.
4. Dry the device with a soft, lint-free cloth. Do not use any solvents or cleaning agents.
Warning! Never use air sprays (aerosols). These could ignite and cause
serious injuries.
11. Technical Data
Cutting capacity
Waste bin volume
Cutting method, cut width
Shredding speed
Width of paper infeed
14
GENIE 440 X
Max. 4 sheets of A4 (80 g/m²)
8 l
Particle-cut, 4 × 38 mm
1.8 m/min
220 mm
G
