Idiomas disponibles
Idiomas disponibles
4.
General View of the Shredder
1
2
3
4
5.
Starting Up
2. Set the waste bin down on a stable, level, horizontal surface and in the vicinity of an
easily accessible power socket.
3. Mount the shredder attachment on the waste bin. The shredder attachment latches
audibly in place. If the shredder attachment is not fitted properly on the waste bin,
the shredder cannot be operated.
Caution! Risk of injury through sharp edges of the cutting mechanism.
The underside of the shredder attachment has sharp edges. Only take hold of the
cutting mechanism using the handle.
6.
Main Switch
The main switch is used to control the cutting mechanism of the shredder. The main switch
can be set to four positions:
•
Position Fwd: Continuous forward running.
•
Position Auto: When set to Auto, the shredding operation of the cutting mechanism
is started automatically as soon as paper is fed into the paper infeed. The device
switches to forward drive and draws the paper in. When shredding is finished, the
device switches off automatically.
•
Position Off: Paper shredder is switched off.
•
Position Rev: Continuous reverse running.
12
5
6
G
1
Insertion slot
2
Main switch
Viewing window
3
Status LEDs (Power,
4
Overheat)
5
Waste bin
Handle for the shredder
6
attachment
