Idiomas disponibles
Idiomas disponibles
7.
Operating the Device
1. Slide the main switch to Off.
2. Connect the power plug to a power socket.
3. Slide the main switch to Auto. The Power status LED lights up green.
Note! A maximum of 4 sheets of A4 paper with a weight of maximally 80 g/m²
may be inserted in the paper infeed at a time. Do not forget that the thickness of
the paper increases when folded, as a result of which the recommended sheet
capacity can be exceeded. Also reduce the quantity of paper when shredding
coarse paper.
4. The paper must be straight when inserted in the paper infeed.
5. Slide the main switch to Off to switch off the device completely.
6. Unplug the power plug from the power socket if the device will not be used for a
longer period.
Note! Let the device cool down for 30 minutes after 1.5 minutes of continuous opera-
tion before continuing shredding.
8.
Overheating Protection
The shredder switches off automatically in the event of overheating. The Overheat
status LED lights up red.
1. Slide the main switch to Off.
2. Disconnect the power plug from the power socket.
3. Let the motor cool down for 30 minutes to room temperature.
4. Then connect the power plug to the power socket again and continue operation.
Note! Observe the continuous operation time stipulated in Chapter "Technical Data".
9.
Clearing Paper Jams
If too much paper is fed into the cutting mechanism, a paper jam occurs.
1. Slide the main switch to Rev. The device ejects the paper.
2. Remove the paper.
3. Slide the main switch to Fwd to free the paper infeed from any residual paper.
Note! If the jam is not cleared by the reverse/forward running process, slide the main
switch to Off, disconnect the power plug and remove the residual paper from the cutting
mechanism manually.
4. Slide the main switch to Auto.
5. Reduce the quantity of paper being shred and continue with the shredding process.
G
13
