Idiomas disponibles
Idiomas disponibles
!
2.1. TRAINING
•
It is the responsibility of the user of this product to familiarise themselves with the content of this user manual.
•
Users must be adequately trained by a competent person in the use, inspection, and maintenance of this
product.
2.2. ENVIRONMENTAL HAZARDS
•
Consideration must be given to any environmental hazards to prevent injury to the user or damage to the
equipment.
•
Environmental hazards may include; chemicals, extreme temperatures, corrosive environments, gases, power
lines and sharp edges.
•
Contact Globestock if you have any questions about the use of this equipment in the presence of any other
environmental hazards.
3. IDENTIFICATION
Definitions of the product features and markings on the SENTRY product labels are provided in the table below. These
must be read in conjunction with Figures 2 and 3.
Figure 2
A
Tripod head locking pin
C
Pulley
E
Product label
G
Leg adjustment pin
I
Tripod foot
Figure 3
A
ID label
C
Product conformity
E
Read the user instructions
G
Do not tamper
When the SENTRY tripod is used as part of a fall arrest system, the user must be equipped
with a means of limiting the maximum dynamic forces exerted on the user during the arrest
of a fall to a maximum of 6 kN.
IMPROPER USE MAY RESULT IN SERIOUS INJURY OR DEATH.
WARNING
B
Rope retaining pin
D
Bow nut anchor point
F
Upper leg
H
Lower leg
B
Product name
Maximum number of users permitted on the
D
system (2)
(-40ºC) / (-40ºF) minimum operating
temperature.
F
(+54ºC) / (130ºF) maximum operating
temperature.
Maximum work load / Minimum breaking
H
strength
8
